All our products in the catalog are just a click away. Floors, coverings, paints, wallpapers and everything you need for a perfect installation. Discover our entire offer.
• Roll dimensions: 10 m x 2 m = 20 m2
• Thickness: 3.0 mm
• Acoustic: 20 dB
• It is glued to the substrate (or with adhesive tape) avoiding smoothing
• Suitable as a base for gluing glue down
For vinyl and green floors.
Packaging: 1 kg – 5 kg – 20 kg
Universal adhesive in plain water dispersion, specific for TNT Smooth, TNT Vinyl Embossed, TNT Opalescent and Fiberglass.
White paste easily applicable to both spatula and roller or brush.
Consumption with roller: about 200 g/m2 (from Mapei data sheet)
Adhesive Ultrabond Eco V4SP for cement screed floors
Do not install on substrates that are not insulated against potential moisture rise.
Specific for Egger AQUA, AQUA+ and AQUADURA+ floors.
Roll dimensions: 26 m x 1 m = 26 m2
Thickness: 0.2 mm
Vapour barrier specifically for laminate floors laid in humid environments.
2.7 m rod
The digitally printed expansion joint is only available for laminate floors IN STOCK at the LI&PRA warehouse
– Also available in silver color –
Female base included
Cod. DCGD/M27 for floors with thickness > 6 mm
Cod. DCGD/B27 for floors with thickness ≤ 6 mm
Click end profile for Wall Hydro made of aluminum.
Rod length: 2600 mm End profile for Splash Wall made of aluminum.
Rod length: 2600 mm
Initial profile for Splash Wall made of aluminum.
Rod length: 2600 mm
U-shaped end profile for Wall Hydro made of aluminum.
Rod length: 2600 mm End profile for Splash Wall made of aluminum.
Rod length: 2600 mm
Length: 20 m (10 m with spacers + 10 m without spacers)
Width: 7.5 cm
Ideal for application near walls as a spacer and sealant in humid environments.
2.7 m rod
The digitally printed terminal profile is only available for laminate floors IN STOCK at the LI&PRA warehouse
– Also available in silver –
Female base included
Cod. DCPT/M27 for floors with thickness > 6 mm
Cod. DCPT/B27 for floors with thickness ≤ 6 mm
Highly prestigious wallpapers with evocative subjects born from the collaboration between Li&Pra and established Italian and foreign designers. The goal is to disseminate an artistic heritage of great value in all contexts of daily life, from the private home to the office, from the atelier to the store, in a growing quest for beauty.
Designer: Fabio Iemmi
2.7 m rod
The digitally printed descending profile is only available for laminate floors IN STOCK at the LI&PRA warehouse
– Also available in silver –
Female base included
Cod. DCPS/M27 for floors with thickness > 6 mm
Cod. DCPS/B27 for floors with thickness ≤ 6 mm
![DR.SCHUTZ LAMINATE CLEANER DETERGENT [LAMINATE FLOORS]<br>](https://www.li-pra.com/wp-content/uploads/2024/04/acc-Laminate-Cleaner-600x600px.jpg)
Packaging: 750 ml
Mild neutral detergent for final cleaning after installation and ordinary cleaning of all laminate floors.
Removes dirt, grease and shoe streaks. Does not form films.
Dilution with water:
1:200 for daily cleaning
![DR.SCHUTZ MATTE FLOOR PROTECTOR [VINYL AND GREEN FLOORS]<br>](https://www.li-pra.com/wp-content/uploads/2024/04/acc-Floor-Mat-600x600px.jpg)
Packaging: 750 ml
Opaque polymer dispersion for protecting newly laid or thoroughly cleaned floors.
Protects the floor with an elastic, non-slip matte film.
Reduces dirt adhesion and facilitates maintenance cleaning. Natural effect.
For ceramic floors
End profile for Splash Wall made of aluminum. Rod length: 2600 mm
